Lifting Chains: Must be dual lifting chain of roller style & must meet safety factor at least 6:1. Hydraulic System: Durable cylinder with a chrome plated ram and a relief valve for overload protection Forks: Heavy duty steel approx. 4.0” wide x 42” long fixed forks Platform: solid steel Battery: A heavy duty 12 volt,…
Read more
The secondary combustion chamber must destroy the contaminant product and must resist to high temperature(1100 °C) Process Filtering system: Scruber to be mentionned as optional Emission Standards Compliance: BS 3316 or équivalent standard Version , the entire carcass of animals ( cattle , horses , Sheep, pigs , etc.) , as well as biologically…
Read more
“Waste chamber Chamber capacity 300 kg Chamber volume .54m3 Chamber size (outside) Width: 91cm, Height: 86cm Length: 152cm Door opening 66 x 76 cm Height to door 84 cm Height to top of stack 5.4 m Suggested slab size (L x W x Thickness) 1.8 m x 2.4 m x 10 cm Burn rate: Approximately…
Read more
air retention for at least 2 seconds at a temperature of less than 850C, the combustion In order to achieve the proper effect. ? must be a two-chamber incinerators, primary and secondary Fuel stoves ? The waste products to reduce the initial volume Possible to minimize (approximately 5% sterile ash Form). Purpose: Top Loader incinerator…
Read more
Dimensions: World standard: 0.83m(I) x 1.0m(w) x 1.4m(h) Burning efficiency: >98% china double chamber incinerator Features: ? Waste type and burn rate: Designed specifically for use by poultry farmers, game-keepers and for pet cremation. The incinerator will burn up to 50 kg of waste per hour. ? Construction: Mild steel welded fabrication consisting of sheet…
Read more
Up to 600kgs per ten-hour day of Type IV pathological waste or red bag waste rated at 2200 BTU’s per kg, based on batch loading twice daily. Incinerator, 20 kg/hr Burn Capacity (min. 1200 kgs. Waste Feed Capacity per day) (4-6 hours operations) (Power Supply 380V, 50Hz, 3Ph) Capacity: 30 kg/hr. Number item: 01 unit…
Read more
18 Electrical supply required 3-phase 19 Auxiliary fuel Diesel or paraffin 20 Primary burner 21 Secondary (after) burner 22 Type of burners Automatic pressure jet 23 Output Primary Approx 600 000 kJ/hour 24 Output Secondary Approx 750 000kJ/hour 25 Emission control Heated refractory screen Low velocity grit arrester screen Built in 26 Paint case 400…
Read more
BURNER, DIESEL DRIVEN waste kind: MEDICAL CARE WASTE Waste calorific well worth: 4000KCAL/KG Dampness Content: 10-25%. Small Capacity: 50Kg/Hour set tons. 2nd Chamber: 2 Secs @ 850degrees C. The major burning chamber have to ensure very little leave temperature degree is not less than 850 levels C. INSULATION. Calcium Silicate. Limiting Regular solution limit 1000…
Read more
Would plant operations be operational on a basis of 24 hours per day, 7 days a week, all year long except for regular and preventive maintenance periods? How many hours per year could your process be operational? What would be your approach for larger projects aiming to valorize 1 000 tons per day?…
Read more
An operating test should be conducted to ensure that all of the control components have been properly installed and that all parts of the incinerator, including controls and safety devices, are in satisfactory operating condition. The requirements for prepurge and time between restarts should be verified. The test should include but not limited to the…
Read more
